Table of Contents
Advertisement
2-2. Setting of This Unit
The status of this unit is set.
2-2-1. Operation Method of Setting
1. Start the SRX Controller, then click the [SETTING] tab. (Refer to Section 2-1-3.)
The [SETTING] screen is displayed.
Screen example
Setting item
2. Click the setting item on the left side of the [SETTING] screen to display the item that you want to
set.
3. After setting the items, click the [APPLY] button.
The setting is registered.
2-14 (E)
[SETTING] tab
[APPLY] button
SRX-T615
Advertisement
Table of Contents
