Installation Of 3D Lens Filter (In The Case Of Lkra-005) - Sony SRX-T615 Installation Manual

1-4. Installation of 3D Lens Filter (In the Case of LKRA-005)

n
In the LKRA-005 Installation Manual, the procedure for installing LKRA-005 in SRX-R320S is de-
scribed. When installing LKRA-005 in this unit, follow the procedure in this manual.
n
. Be careful not to attach the filter bracket (A)/(B) assemblies in the wrong position.
. Attach the knob securely to prevent the lens filter from dropping.
1. Attach the three filter bracket (A) assemblies with the six screws supplied with the 3D lens filter.
2. Attach the filter bracket (B) assembly with the two screws supplied with the 3D lens filter.
Filter bracket (A) assembly
PSW6 x 8
Filter bracket (A) assembly
PSW6 x 8
SRX-T615
PSW6 x 8
Filter bracket (A) assembly
PSW6 x 8
Filter bracket (B) assembly
1-13 (E)