Table of Contents
Advertisement
In the case of attaching the pipe (short) to the back and forth of this unit
t
The procedure is the same as the pipe (long).
1. Loosen the nut in the direction of the arrow A, then insert the handle arm in the direction of the
arrow B.
2. Tighten the nut to fix the handle arm.
3. Attach the handle arm to the adjuster of other three portions by repeating steps 1 and 2.
B
Nut
A
Adjuster
Handle arm
1-7 (E)
SRX-T615
Advertisement
Table of Contents
