Table of Contents
Advertisement
3 [TEST PATTERN]
An image can be adjusted by projecting the test pattern, built in this unit, on the screen without inputting
the signal from other equipment.
Each test pattern is as follows:
. "Off": No test pattern
. "Cross Hatch"
. "Cross Hatch (Invert)"
. "Checker Flag"
. "Test Mode 1"
. "Scope"
. "Flat"
. "Dual 3D"
. "Single 3D"
The test patterns in [Dual 3D] and [Single 3D] are for 3D lens.
4 [SINGLE 3D ADJUST]
This item is for 3D lens.
5 [DISTORTION ADJUST 2D/DUAL 3D]
When the MAIN version is earlier than 3.12.0530, this menu (button) is not displayed.
Adjusts the image distortion when the images displayed by the two projectors are overlaid.
When you click the [SELECT] button, the following screen is displayed.
n
When you use the two projectors by placing them next to each other, use the one as the reference projec-
tor and adjust the other projector to the reference projector. Do not change the values of the reference
projector except for "Centering".
Adjust the reference projector only for "Centering" adjustment.
Screen example
Items
Adjust each item by using the [_]/[+] buttons.
2-7 (E)
SRX-T615
Advertisement
Table of Contents
