Table of Contents
Advertisement
When an adjusting point is double-clicked, the adjustment screen is displayed.
Screen example
A setting value increases when you click the [+] button. A setting value decreases when you click the
[_] button. The numeric value can also be entered directly.
Each setting value is as follows:
(1) to (4) H: 0 to 2047
V: _1023 to 1023
V: _511 to 511
(5), (6)
H: _511 to 511
(7), (8)
All items in a [MASKING ADJUST/EDGE BLENDING] are returned to the factory setting when
you click the [RESET] button.
The blending adjustment screen is displayed when you click the [BLENDING] button. (MAIN
version 3.19.0600 or later)
For details, refer to Section 2-7.
. [MUTING]
Operates to close and open of the douser.
- [ON] button: Close the douser. (Muting condition)
- [OFF] button: Open the douser.
. [CUT OFF]
When a 3D lens is attached, switch the output of image for right eye and left eye.
2 Status (POWER/Location/Name/Lamp status/Warning Info)
. [POWER]
- [STANDBY] button: Puts this unit into the standby state. (Canceled using an [ON] button.)
- [ON] button:
Turns on the power.
. Location:
Displays the location.
. Name:
Displays the owner name.
.
(Lamp bulb): The color changes according to the time of the lamp used.
0% to 80%:
White
80% to 100%:
Yellow
100% or more:
Red
. Warning Info:
Displays warning information.
2-4 (E)
Adjustment screen
SRX-T615
Advertisement
Table of Contents
