Registration Adjustment; Fine Adjustment Of Registration - Sony SRX-T615 Installation Manual

4k digital projector

Hide thumbs Also See for SRX-T615:

Table of Contents

2-5. Registration Adjustment

Moves R (red), G (green), and B (blue) in the horizontal and vertical directions up to two pixels, one pixel

at a time so as to adjust registration. For details, refer to "5. SERVICE tab" in Section 2-1-4.

Also, perform the fine adjustment of the registration in the image peripheral portion as required. (Refer to

Section 2-5-1.)

. First, perform the adjustment of R, G and B in [REGISTRATION ADJUST] of the [SERVICE] screen.

If the misregistration still remains, then perform the fine adjustment.

. The fine adjustment can be performed only when the projector MAIN version is 3.19.0600 or later. The

version can be confirmed in [MAIN] of [VERSION INFORMATION]. (Refer to the following screen.)

1. Start the SRX Controller, then click the [SERVICE] tab. (Refer to Section 2-1-3.)

The [SERVICE] screen is displayed.

[ZONE] button

Screen example

[REGISTRATION ADJUST]

2. Click the [ZONE] button.

The [ZONE REGISTRATION ADJUST] screen is displayed.

Screen example

[Test Pattern]

[Zone Adjust]

SRX-T615

[SERVICE] tab

[VERSION INFORMATION]

Confirm the MAIN version.

2-35 (E)

Table of Contents