Table of Contents
Advertisement
2. Double-click the upper right adjustment point of [MASKING ADJUST/EDGE BLENDING].
The adjustment screen is displayed.
Screen example
3. Enter "560" in [Horizontal].
Setting value: Blending width 512 + 48 = 560
4. Double-click the lower right adjustment point.
Enter "560" in [Horizontal].
Setting value: Blending width 512 + 48 = 560
Screen example
[BLENDING] button
5. Click the [BLENDING] button.
The [EDGE BLENDING] screen is displayed.
6. Click the [ON] button in [Right] and select "512" in [Width].
Click "On" of the radio button in [Marker].
A green line is displayed at the start point of blending and a red line is displayed at the end point.
n
It is recommended to set [Upper] and [Lower] to "256" or "512".
7. When the setting is completed, click the [CLOSE] button.
2-40 (E)
Adjustment screen
SRX-T615
Advertisement
Table of Contents
