Security Network Arp Inspection Entry - Planet Networking & Communication IGSW-24040T User Manual

Security Network ARP Inspection Port Mode [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable ARP Inspection port
disable : Disable ARP Inspection port
(default: Show ARP Inspection port mode)
Default Setting:
Disable
Example:
Enable the ARP inspection mode of port 1
SWITCH/>security network arp inspection port mode 1

Security Network ARP Inspection Entry

Description:
Add or delete ARP inspection static entry.
Syntax:
Security Network ARP Inspection Entry [<port_list>] add|delete <vid> <allowed_mac> <allowed_ip>
Parameters:
<port_list> : Port list or 'all', default: All ports
: Add new port ARP inspection static entry
add
delete : Delete existing port ARP inspection static entry
: VLAN ID (1-4095)
<vid>
<allowed_mac>: MAC address (xx-xx-xx-xx-xx-xx), MAC address allowed for doing ARP request
<allowed_ip> : IP address (a.b.c.d), IP address allowed for doing ARP request
Default Setting:
300
Example:
Add ARP inspection static entry.
SWITCH/>security network arp inspection entry 1 add 1 00-30-4f-00-00-11 192.168.0.11
406
User's Manual of IGSW-24040T