Fax Service Mode 6 (Ram Initialization) - Panasonic DP-3030 Service Manual

5.2.6.

Fax Service Mode 6 (RAM Initialization)

Initializes RAM and restores the Function Parameters to their default values.
Note:
This operation should be performed when the unit is first installed.
Select the "06 RAM initialize" on the Touch Panel display.
↓
Select the desired code number on the Touch Panel display.
↓
Touch the "YES" key to initialize RAM.
↓
Touch the "OK" button 3 times.
↓
Press "FUNCTION" and "C (CLEAR)" keys simultaneously to exit the service mode.
No. Initialize Mode
01 Parameter Initialize
02 Journal Clear
03 Auto Dial Clear
Program Dial Clear
04
05 LOGO/ID/PSWD Clear
06 LBP Error Log Clear
07 Shipment Set
08 Flash Memory Clear
09 All Job Clear
Ver. 2.1
RAM Initialization Table
Restores the Fax and Function Parameters to default
values.
Note: Turn the Power Switch to the OFF and back to the
ON position to enable the parameter settings.
Clears the Journal contents.
Clears the One-touch, ABBR Numbers and Phone Books.
Clears the Program keys.
Clears the Logo, ID, Polling Password.
Clears the Printer Error Log.
Deletes all setting information, except parameter number
80 and 81, then set default values.
Deletes all information in the Flash Memory.
Clears all Jobs stored in Flash Memory.
225
Description
DP-2310/3010
DP-2330/3030
MAR 2005