Panasonic DP-3030 Service Manual page 209

No. Parameter
068 NYSE Fax
Forward
(USA and
Canada Only)
069 NYSE Local
Print
(USA and
Canada Only)
070 Line Error
071 Total Error
072 Continuous Error 1 = Off (unlimited)
073 Error Detect
074 RTN Receive
075 Coding
076 Batch TX
(USA and
Canada Only)
077 RX JAM Length 1 = Off (unlimited)
078 Not Used
~
079
080 Original Lead
Edge ADF
081 Original Tail
Edge ADF
082 JAM Length
Ver. 2.1
Function Parameter Table
Selections
1 = Off
2 = On
1 = Inc
2 = On (Always)
1 = 128 lines
2 = 256 lines
3 = 512 lines
4 = 1024 lines
5 = 2048 lines
6 = Off
(will not disconnect line)
1 = 5%
2 = 10%
3 = 15%
4 = 20%
2 = 3 lines/STD
3 = 6 lines/STD
4 = 12 lines/STD
1 = Lines
2 = Rate
1 = Disconnect
2 = Continue
1 = MH (MH only)
2 = MR (MH or MR)
3 = MMR
(MH or MR or MMR)
4 = JBIG
1 = Off
2 = On
2 = 2 m
-99
~
+99
-127
~
+127
1 = 1 m
2 = 2 m
Selects whether the machine will forward the
incoming and outgoing faxes to a specified station.
Note:
Once this parameter is activated, Fax Forwarding
via Fax Parameter 054 is automatically disabled,
an Access Code of "0000" is automatically
assigned and Fax Parameter 038 has a new
setting added called "NYSE".
Selects the printing condition for the incoming faxes
after FAX Forwarding.
INC. : Prints only if FAX Forwarding fails.
ON : Always prints.
1. Selects the line disconnect condition during
reception. If the number of line errors exceed this
setting, the unit will disconnect the line.
2. Selects the transmit condition of RTP/PIP or RTN/
PIN.
(Available if No.73 Error Detect is set to "LINES")
(See Note 1)
Selects the transmit condition of RTP/PIP or RTN/
PIN.
(Available if No.73 Error Detect is set to "RATE".)
(See Note 2)
Selects the continuous total error criteria of Off/3/6 or
12 lines in Standard mode. If continuous total error
exceeds this setting, the unit will transmit RTN/PIN.
(Available if No.73 Error Detect is set to "RATE".)
Selects the error detect condition Lines/Rate.
Selects whether to disconnect the phone line or
continue when "RTN" is received.
Selects the coding scheme.
Selects whether the batch transmission is available.
Selects the maximum length of a received document
that can be printed.
Adjusts the distance between the scanning sensor
ON position and the scanning start position.
Adjusts the distance between the scanning sensor
OFF position and the scanning end position.
Selects the maximum length of the original that can
be scanned.
209
DP-2310/3010
DP-2330/3030
Function
MAR 2005