Panasonic DP-3030 Service Manual page 202

Service
Mode
F9 Unit
Maintenance
Ver.2.1
Item
06 RAM 00 Parameter Initialize
Initialize
01 All Job Clear
02 Not Used
03 Shipment Set
04 LBP Fuser Reset
05 Dept. Counter Clear
07 Firmware 00 Update from F-ROM
Update Master Card
01 Update from USB
08 Program 00 Main
Backup
01 Option 1 all
(Refer to
02 Option 1 a
Sect. 3.7.)
03 Option 1 b
04 Option 2 all
05 Option 2 a
06 Option 2 b
09 Update Program Card
10 Program 00 From card to slot 1
Copy
01 From card to slot 2
02 From slot 1 to card
03 From slot 1 to slot 2
04 From slot 2 to card
05 From slot 2 to slot 1
11 Parameter Backup
12 Parameter Restore
13 Page Memory Size
14 Sort Memory Size
F9 Mode
Resets the Fax and Function
parameters to default values.
Note: Turn the Power Switch to the OFF
and back to the ON position to enable
the parameter settings.
Clears all Jobs stored in Flash Memory.
Clears All Jobs, All Preset Data,
Parameter Initialize & Resets the
Counters (Fax).
Clears the LBP fuser error.
Updates the firmware in the machine
with the Master Firmware Card.
Updates the firmware in the machine
with the USB.
Onboard F-ROM 4MB
Slot 1 FRM8 PCB 8MB
Slot 1 FRM8 PCB 4MB (a)
Slot 1 FRM8 PCB 4MB (b)
Slot 2 FRM8 PCB 8MB
Slot 2 FRM8 PCB 4MB (a)
Slot 2 FRM8 PCB 4MB (b)
Creates a Master Firmware Card using
the Firmware Update Kit. A 4MB or 8MB
Flash Memory Card will be required
depending upon the model.
Configuration for Program copy.
Backup the Parameter.
Restore the Parameter.
Displays the page memory size (MB).
Displays the sort memory size (MB).
202
DP-2310/3010
DP-2330/3030
Remarks
MAR 2005