Removing The Old Opc Drum - Panasonic DP-3030 Service Manual

Ver.2.1
(26) Shake the Developer Bottle thoroughly (approx.
30 seconds).
(27) Pour the appropriate developer evenly into the
developer unit. Make sure to empty the bottle.
(28) Close the Developer Cover.
Note:
When reinstalling the Developer Cover, ensure
that 2 Magnet Roller Sheets are outside as
illustrated.
<Removing the Old OPC Drum>
(29) Remove the OPC Drum Shaft Holder
Assembly.
(30) Lift the OPC Drum, holding the right side where
the OPC Drum Shaft Holder Assembly was
installed.
Note:
Do not touch the surface of the OPC Drum with
bare hands when removing or reinstalling it.
Grease from fingerprints will affect copy quality.
When installing a new OPC Drum, clean the Bias
Charge Roller with a soft dry cloth.
(31) Remove the Bias Charge Roller (725).
(32) Remove 2 Screws (20).
58
DP-2310/3010
DP-2330/3030
MAR 2005