Panasonic DP-3030 Service Manual page 376

Ver.2.1
<For 3-Paper Tray Configuration>
(1) Open the Right Cover.
(2) Remove 2 Silver Screws.
(3) Remove the Right Rear Cover.
(4) Remove 6 Silver Screws.
(5) Remove 3 Lower Rear Covers.
Caution:
The OPC Drum is sensitive to light. To prevent
optical exposure problems, do not expose the
OPC Drum to direct sunlight or bright light (even if
it is a 1000-Lux fluorescent lamp).
(6) Slide the 2nd and 3rd Paper Trays out.
(7) Remove 8 Screws.
(8) Remove 4 Brackets.
(9) Disconnect the CST3 Harness from CST2 PC
Board (CN772).
(10) Release the CST3 Harness from the Harness
Clamp.
(11) Separate the 3rd Paper Feed Module from the
machine.
Caution:
The machine weights approximately 181 lb (82 kg)
with the i-ADF pre-installed. To prevent injuries,
use the appropriate number of personnel and the
proper equipment to lift or move the machine.
376
DP-2310/3010
DP-2330/3030
MAR 2005