Panasonic DP-3030 Service Manual page 300

Ver.2.1
Caution:
If the Red LEDs on the SC and SPC PC Boards
are ON, the Power is still ON.
Please read these Installation Instructions once
again.
(3) Release the Pre-installed 2 wire Harness from
2 Harness Clamps.
(4) Plug the FXB PC Board Assembly into the SC
PC Board with on Board Connector.
(5) Secure the FXB PC Board Assembly with
1 Screw.
(6) Connect the Pre-installed 2 wire Harness
(Gray connector) to the FXB PC Board (CN393 :
White connector).
(7) Secure the Pre-installed 2 wire Harness with
Harness Clamp on the FXB PC Board.
(8) Connect one end of the MJR Harness and LIN
Harness to the MJR PC Board Assembly (CN22
and CN25).
300
DP-2310/3010
DP-2330/3030
MAR 2005