Panasonic DP-3030 Service Manual page 355

(3)
(4)
(8)
(10)
(11)
Ver. 2.1
6~8mm
Note:
(7)
(5)
(6)
(10) Remove the CN Bracket.
(9)
(11) Bend the protective Tab on the CN Bracket more
355
(3) Install 2 Thumb Screws, one on each ADF
Mounting Bracket.
When installing the 2 Thumb Screws, do NOT
tighten the Screws. Keep about 6-8mm space as
illustrated.
(4) Install the Automatic Document Feeder on top of
the ADF Mounting Brackets.
Note:
a. Set the Automatic Document Feeder in the
direction of the arrow.
b. Align the hallmark on the right side of the
Hinge Base and the ADF Mounting Bracket
as illustrated.
(5) Tighten the 2 Thumb Screws (Silver).
(6) Install 2 Hinge Cover 2.
(7) Secure the Automatic Document Feeder with 2
Silver Screws.
(8) Install 1 Screw on the back of the left ADF
Mounting Bracket from the bottom.
(9) Remove 1 Screw.
than 90° as illustrated.
DP-2310/3010
DP-2330/3030
MAR 2005