Paper Feed Module Operation - Panasonic DP-3030 Service Manual

< Paper Feed Module Operation >
a. When the printing operation begins, the Main Motor (907) starts driving the Gears.
b. The Clutch (1105) is energized for a specified period of time and turns ON. This activates the Paper
Feed Roller (1144). The paper is separated into individual sheets by the C25 Gear Roller (1145) and
is transported.
c. The paper is transported to the Registration Roller (1121), activating the Registration Sensor (1045).
After a specified period of time, the Clutch (1105) is turned ON and the Registration Roller (1121)
and the Registration Pinch Roller start rotating. The paper is transported to the OPC drum area.
d. The paper passes through the Read Point Sensor (1045) and after a specified period of time, the
Clutch (1105) is turned OFF. The Registration Roller and the Registration Pinch Roller stop rotating.
Ver. 2.1
Clutch (1105)
Registration Actuator (1120)
Registration Sensor (1045)
Paper Feed Roller
(1144)
C25 Gear Roller
(1145)
C25 Gear Roller
(1145)
245
DP-2310/3010
DP-2330/3030
MAR 2005