8 Options and Supplies
8.1.
Service Notes "Firmware Update" for PCL-IPX/SPX or PS-IPX/SPX
Option Installation (For DP-2330/3030)
To use PCL-IPX/SPX (DA-PC301) or PS-IPX/SPX (DA-MC301) option individually or in combination with
other options, changing to Type B or Type D SC firmware is required. The required firmware is on the CD
included with the options.
Note:
The DA-EM600 must be installed for the printer controllers above to function. The only time a DA-EM600
is needed is if you are installing the PostScript (PS) or PCL option. There will never be a need for 2 of
these, even if there are other options, such as Fax, added.
Before proceeding, it is important to determine the Final Configuration of your machine in order to correctly
identify the required firmware from the table below. Carefully read and follow the Installation Instructions for
the appropriate option.
The firmware for SC, SPC and PNL must be updated in this sequence as a set. Please update the firmware
with the latest version as a set by referring to the following table.
Firmware Version Table (For DP-2330/3030)
SC
PNL
SPC
Slot 1 FROM PCB
Ver. 2.1
Standard Firmware
(SC = Type A)
SFD_L25RAxVxxxxx_xx
L25R_PNLAxVxxxxx_xx
L25R_SPCAxVxxxxx
Not Required
PCL Firmware
(SC = Type B)
SFD_L25RBxVxxxxx_xx
←
←
Required
273
DP-2310/3010
DP-2330/3030
PostScript Firmware
(SC = Type D)
SFD_L25RDxVxxxxx_xx
←
←
Required
MAR 2005