Service Modes (For Facsimile); Fax Service Mode Procedure; Fax Service Mode Table - Panasonic DP-3030 Service Manual
Digital imaging systems
Hide thumbs
Also See for DP-3030:
- Specification sheet (4 pages) ,
- Specifications (2 pages) ,
- Service handbook (312 pages)
Table of Contents
Advertisement
5.2.
Service Modes (For Facsimile)
Caution:
The factory default parameters are preset (country dependent) for optimum performance and in
compliance with the local telecommunication regulations/standards, and do not need to be changed.
Changing some of these parameters may cause the unit to be no longer compliant or become
inoperable.
5.2.1.
Fax Service Mode Procedure
1. To select the Service Mode
The Service Mode is selected when "FUNCTION", "ORIGINAL SIZE (LEDGER/A3)" and "3" keys on
the keypad are simultaneously pressed, then F1 will appear in the display.
Press "9" and "START" keys to enter F9 Mode: Unit Maintenance.
Select "00 FAX Service Mode" on the Touch Panel display to enter Facsimile Service Mode.
2. To exit the Service Mode
The Service Mode is reset when the "FUNCTION" and "C (CLEAR)" keys are pressed simultaneously.
5.2.2.
FAX Service Mode Table
The following service modes are provided to assist you in setting operational functions of the unit and
determining the condition of the unit.
No.
Service Mode
00
Not Used
01
Function Parameter Setting
02
RAM Edit Mode
03
Print Parameter List / Report
04
Modem Tests
05
Not Used
06
RAM Initialize
07
Not Used
08
Check & Call
09
System Maintenance
Ver. 2.1
Allows changes to the function parameters (the home
position, etc.).
Factory use only.
Prints the Function Parameter List, Page Memory Test, Printer
Report, All Document File, Protocol Trace and Toner Order
Form.
Generates various binary, tonal and DTMF signals, by the
modem.
Initialize RAM and restore the default value of the function
parameters.
Note: Turn the Power Switch to the OFF and back to the ON
position to enable the parameter settings.
Allows input of information for Service Alert Report,
Maintenance Alert Report and Toner Order Form.
Used for Firmware Update, Firmware Backup, Parameter
Restore, Parameter Backup, Transferring Firmware from the
PC to the Flash Card and Sending a Received File during a
fatal printer error.
203
Description
DP-2310/3010
DP-2330/3030
MAR 2005
Advertisement
Table of Contents
Troubleshooting
