Turning The Power On; Selecting The Operation Mode (Scan/Copy/Fax); Setting The Original; Display Messages - Panasonic KX-MB2060C Important Information Manual

1.4 Turning the power ON

Turn the power switch to the ON position (A).
1.5 Selecting the operation mode (Scan/
Copy/Fax)
You can select the desired mode by pressing one of the following
buttons.
– MScanN: Select this mode when using the unit as a scanner.
– MCopyN: Select this mode when using the unit as a copier.
– MFaxN: Select this mode when using the unit as a fax machine.
A
Detailed operating instructions are on the CD-ROM.

1.6 Setting the original

1.6.1 Using the scanner glass
1
Open the document cover (A).
2
Place the document FACE DOWN on the scanner glass (B),
aligning the top left of the document with the corner where the
mark is positioned.
3
Close the document cover.
1.6.2 Using the automatic document feeder
A
1
Insert the document (up to 20 pages) FACE UP into the feeder
until a single beep is heard.
2
Adjust the width of the document guides (A) to fit the actual
size of the document.

1.7 Display messages

To indicate the unit's status, one or more of the following messages
will appear on the display. See the operating instructions for details.
1.7.1 Base unit
– "CALL SERVICE"
1. Important Information
A
B
5