Panasonic DP-3030 Service Manual page 379

Ver. 2.1
(31) Connect the HT5 Harness to the HT-CST
Harness.
(32) Connect the HT-CST Harness to the HT2
Harness.
(33) Install the Harness Clamp.
(34) Insert the Harnesses to 2 Harness Clamps.
(35) Connect the CST3 Harness to CST2 PC Board
(CN772).
(36) Reinstall all Covers.
<For 4-Paper Tray Configuration>
(1) Open the Right Cover.
(2) Remove 2 Silver Screws.
(3) Remove the Right Rear Cover.
(4) Remove 8 Silver Screws.
(5) Remove the 4 Lower Rear Covers.
Caution:
The OPC Drum is sensitive to light. To prevent
optical exposure problems, do not expose the
OPC Drum to direct sunlight or bright light (even if
it is a 1000-Lux fluorescent lamp).
(6) Slide the 3rd and 4th Paper Trays out.
(7) Remove 8 Screws.
(8) Remove 4 Brackets.
(9) Disconnect the CST2 Harness from CST3
Harness (CN808).
(10) Release the CST2 Harness from the Harness
Clamp.
379
DP-2310/3010
DP-2330/3030
MAR 2005