Service Modes (For Facsimile) - Panasonic DP-2310 Service Handbook

4.2.

Service Modes (For Facsimile)

4.2.1. Fax Service Mode Procedure
1. To select the Service Mode
The Service Mode is selected when "FUNCTION", "ORIGINAL SIZE (LEDGER/A3)" Keys and Key "3"
on the keypad are simultaneously pressed, then F1 will appear in the display.
Press "9" and "START" keys to enter F9 Mode: Unit Maintenance.
Select "00 FAX Service Mode" on the Touch Panel display to enter Facsimile Service Mode.
2. To exit the Service Mode
The Service Mode is reset when the "FUNCTION" and "C (CLEAR)" keys are pressed simultaneously.
4.2.2. FAX Service Mode Table
The following service modes are provided to assist you in setting operational functions of the unit and
determining the condition of the unit.
No. Service Mode
00 Not Used
01 Function Parameter Setting
02 RAM Edit Mode
03 Print Parameter List / Report
04 Modem Tests
05 Not Used
06 RAM Initialize
07 Not Used
08 Check & Call
09 System Maintenance
Ver. 1.00
Allows changes to the function parameters (the home
position, etc.).
Factory use only.
Prints the Function Parameter List, Page Memory Test, Printer
Report, All Document File, Protocol Trace and Toner Order
Form.
Generates various binary, tonal and DTMF signals, by the
modem.
Initialize RAM and restore the default value of the function
parameters.
Allows input of information for Service Alert Report,
Maintenance Alert Report and Toner Order Form.
Used for Firmware Update, Firmware Backup, Parameter
Restore, Parameter Backup, Transferring Firmware from the
PC to the Flash Card and Sending a Received File during a
fatal printer error.
96
Description
DP-2310/3010
APR 2003