Testing Inputs And Outputs - DURKOPP ADLER 906 Service Manual

Individual settings

3.16 Testing inputs and outputs

The tests may only be performed by qualified personnel that have re-
ceived training from Dürkopp Adler.
1. In the Extras > Service > Multitest menu item, tap the Inputs/
 The IO Test Page menu is displayed.
Figure 55: Testing inputs and outputs
(1) - Area for input elements
The input elements are listed and selected at the left side (1) and the out-
put elements at the right side (2).
2. Use Select + or Select - to select the desired element in the
 The number of the element is displayed on the Selected: button.
3. Tap the Selected: button.
4. Test the element using the On/Off or Switchover buttons, depending
Service manual 906 - 00.0 - 11/2014
WARNING
Risk of injury from sharp or moving parts.
Do reach into the machine during function testing of
the input or output elements.
outputs option.
①
respective area.
on the type of the input or output element.
(2) - Area for output elements
②
73