Individual settings
3.1.4 Lowering the machine upper section
Figure 3: Lowering the machine upper section
(1) - Locking lever
1. Hold the machine upper section in the head cover region.
2. Release the latch (2).
3. Carefully lower the machine upper section.
4. Latch the locking lever (1) under the table plate.
Service manual 906 - 00.0 - 11/2014
WARNING
Risk of injury from sharp or moving parts.
Switch off the sewing unit at the main power switch
before lowering the machine upper section and
performing maintenance work.
NOTE
Danger of machine damage from falling machine upper section.
Hold the upper section firmly when lowering until it is once more in
position.
①
(2) - Latch
②
15