6. Activate the parameter t 06 11 Bobbin Rotation Monitor.
Press the
7. Restart the machine to adopt the settings.
3.2 Testing the SSD
You can use the menu
Control to test the SSD:
Icon
14
button to return to the main screen.
Service >
Multi test >
Description
RFW limit
• Value range: 0.0 - 4.0
• Default value: 1.7
RFW intensity
• Value range: 0.0 - 4.0
• Default value: 1.7
Test the stitch counter hook thread
• Check: Switch to the display Stitch counter hook thread and turn
the bobbin; the counter is incremented with every half turn
Test value of the hook thread stitch counter
• Check: Switch to the display Value hook thread stitch counter and
turn the empty bobbin slowly into the reflecting area.
With the proper setting, the value of the hook thread stitch counter
must be > 1500.
Test the remaining thread monitor signal
Check the signal of the reflecting surface
Test the bobbin rotation counter
• Check: Switch to the display Bobbin rotation counter and turn the
bobbin; the counter is incremented 12 times per turn
Test the value of the bobbin rotation counter
• Check: Switch to the display Value hook thread stitch counter and
turn the empty bobbin slowly into the reflecting area.
With the proper setting, the value of the hook thread stitch counter
must be > 1500.
Navigation >
t 60 09 Test Loop
Additional Instructions D867 - 00.0 - 04/2020
Software settings
Settings >