DURKOPP ADLER 906 Service Manual page 94

Clean and lubricate inner slider
Recommended grease:  4.2 Lubrication, page 84
Figure 68: Disassembling the inner slider
(3) - Shaft retaining ring
Cleaning steps
1. Remove shaft retaining rings (3) and the individual parts.
2. Clean all parts thoroughly.
3. Lubricate overlapping surfaces in order to improve sliding friction.
4. Assemble the inner slider in the reverse order.
92
NOTE
Solvents can damage the adhesive lining!
Ensure that no solvent gets onto the adhesive lining during cleaning.
• Use grease sparingly.
③
Service manual 906 - 00.0 - 11/2014
Maintenance