DURKOPP ADLER 906 Service Manual page 106

Setting steps
1. Release the counternut (3).
2. Turn the setting screw (4):
3. Tighten the counternut (3).
Important
A choke is available for each direction of movement. Make the setting on
both chokes.
Information
• You can use the Multitest menu to activate each pneumatic cylinder
Fitting the cover
1. Fit the cover (2).
2. Screw in the screws (1) and tighten them.
104
• Turn counterclockwise: If the movement is quicker, the limit stop in
the end position is harder and noisier.
• Turn clockwise: The hanger moves more slowly, the limit stop in the
stop position is smoother and quieter.
separately in order to test the setting.
Maintenance
Service manual 906 - 00.0 - 11/2014