Hardware Installations and Upgrades
Figure 53. Installing Hard Disk Drive – Removing 2.5" HDD carrier
2. Remove the four screws securing the plastic drive blank from the 2.5" HDD carrier (see letter
C). Disengage the plastic drive blank from the HDD carrier. Remove the plastic drive blank
from the 2.5" HDD carrier (see letter D).
Figure 54. Installing Hard Disk Drive – Removing Plastic Drive Blank
3. Install the hard disk drive using the four screws as shown. Make Sure the connector end of the
drive matches the backplane connector (see letter E).
Figure 55. Installing Hard Disk Drive – Installing 2.5" HDD
4. With the lever open, insert the hard disk drive assembly into the chassis, then push in the lever
to lock it into place (see letter F).
34
®
Intel
Server System R2000LH2/LT2 Service Guide