Hardware Installations and Upgrades
5. Remove the air duct. For instructions, see
Installing the Intel
Locate the RMM4 Lite connector next to onboard NIC port, carefully pick up the Intel
Lite module, and match the alignment pin of the module and the connector on server board.
Press to install.
®
Install the Intel
1. Connect the cable to the server board (see letter A).
2. Secure the module with the two screws as shown (see letter B).
3. Connect the cable to the module (see letter C).
40
®
RMM4 Lite
Figure 63. Installing the Intel
RMM4 NIC
Figure 64. Installing the Intel
Removing the Air
Duct.
®
RMM4 Lite
®
RMM4 NIC
®
Intel
Server System R2000LH2/LT2 Service Guide
®
RMM4