System Security - Wi-LAN Hopper Plus 120-24 Installation And Configuration Manual

Configuration

System Security

The System Security menu is used to control access to a Hopper Plus 120-24 unit, including the following.
• Restrict access to a unit's Main Menu with passwords
• Restrict SNMP read and write access with SNMP Community Name
• Enable or disable remote access via Ethernet
• Enable or disable remote access via a wireless link
• Determine the amount of time that a unit remains idle before it automatically logs out
Viewing System Security
➧
To view system security settings
1. From the Main Menu, select System Security and press
displayed.
SNMP Community Name 1
SNMP Community Name 2
Change User Password
Confirm User Password
Change Supervisor Password
Confirm Supervisor Password
Ethernet Access to Local Host
Wireless Access to Local Host
Auto Logout Minutes (1-120)
SNMP Community Name 1
SNMP Community Name 2
Change User Password
Change Supervisor
Password
Ethernet Access to
Local Host
84
System Security
-> public
netman
Press Enter to change password
Press Enter to confirm password
Press Enter to change password
Press Enter to confirm password
on
on
10
Controls SNMP access to the Hopper Plus
Read access only
Controls SNMP access to the Hopper Plus
Read and write access
Changes user password to enable access to main menu
Read access only
Changes supervisor password to enable access to main
menu. Read and write access
Allows remote access to unit to change configuration
settings via wire link with telnet or SNMP
Hopper Plus 120-24 Installation & Configuration Guide
. The System Security menu is
Enter