Dec 2000 Rev - Wi-LAN Hopper Plus 120-24 Installation And Configuration Manual

10/100BASET Connection
2. Connect the 10/100BaseT port of the base station to the internet port of the PC. You can either connect
to a network hub or connect directly using an RJ45 crossover ethernet cable.
Simple Network Test Setup
Base Unit
10/100 BaseT HUB
3. Power up both Hopper Plus units. Initially the LEDs should appear as follows.

DEC 2000 Rev 02

AIR LED = orange
MODE LED = Off
POWER LED = Green
PC
POWER LED
MODE LED
AIR LED
10/100BASET Port
To wired LAN or
PC Internet port
Remote Unit
AIR LED = orange
MODE LED = Off
POWER LED = Green
Green
Off
Orange
Bench Test Units
LAN
25