Setting The Internet Ip Address - Wi-LAN Hopper Plus 120-24 Installation And Configuration Manual

Setting the Internet IP Address

➧
To set the new Internet IP address
1. From the Main Menu, select IP Network Configuration and press
Configuration menu is displayed.
Internet IP Address
New IP Address (Reboot Reqd)
Internet IP Subnet Mask
Default Gateway IP Address
SNMP NMS Trap IP Address
MAC Filter Entry Age Time Minutes (1-60)
2. Select New IP Address and press
3. Type the unique Internet IP address for the unit.
4. Press the Enter key. The new Internet IP address appears in the New IP Address (Reboot
Reqd)field, but the old address remains in the Internet IP Address field.
5. To save the changes, reboot the unit or power the unit down and up.
6. Press to exit to the Main Menu.
Esc
Setting the IP Subnet Mask
➧
To set the default IP subnet address
1. From the Network Configuration menu, select Internet IP Subnet Mask and press
data field highlights.
2. Type the Internet IP subnet mask for the unit.
3. Press . The Internet IP subnet mask appears in the field and is assigned to the unit.
Enter
4. Press to exit to the Main Menu.
Esc
DEC 2000 Rev 02
Network Configuration
. The data field highlights.
Enter
Network Configuration
. The Network
Enter
192.168.1.100
-> 192.168.1.100
255.255.255.0
0.0.0.0
0.0.0.0
5
. The
Enter
41