Fru Information (Service Only); Removing The External Led Card - IBM xSeries 230 6RY Hardware Maintenance Manual

FRU information (service only)

Field Replacement Units (FRUs) should be replaced by qualified service personnel
only.
Note: Before performing any removals, read "Safety information" on page 149 and

Removing the external LED card

To remove the external LED card, do the following:
1. Power off the server.
2. Disconnect all external cables.
3. Remove the cover. See "Removing the cover, door, and bezel" on page 48.
4. Remove the blower fan assembly. See "Replacing a fan assembly" on page 69.
5. Disconnect cables.
6. Press the arrow on the tab 1 to release the bracket.
7. Rotate the LED card 2 away from the front bezel to slide the card out of the
© Copyright IBM Corp. 2000
"Before you begin" on page 47.
1
Tab
2
External LED card
slot.
119