IBM xSeries 230 6RY Hardware Maintenance Manual page 124

[==]
Netfinity Manager CD for Windows 95/NT
[==]
NetFinity Admin
NULL Manager
;Screen Capture GUI
;NULL Manager
; CL 0 1 SAVEG.EXE
; CL 0 1 SAVEG.HLP
This INSTALL.INI will create a Netfinity Manager installation configuration that
also installs Advanced System Management, Capacity Manager, Remote
Workstation Control, and Netfinity Manager World Wide Web enhancement.
The second section contains the names of the CD that this installation script will
use.
The third section contains the list of options that can be installed. These are the
options that are selected by the choices in the first section. The options are
consecutively numbered starting at 1, so any inserted options will change the
number of all following options. Each option uses the following format:
Option Name
Dll-entrypoint
The easiest way to customize an installation is to simply put a semicolon in front
of any service that you want to remove from the installation.
To add a line item in a specific section, add all the necessary item information in
the format shown in the following example.
Before:
116
Hardware Maintenance Manual: xSeries 230 Models 6RY, 61Y
Capacity Manager Enhancement [CapMgt 5600]
Remote Workstation Control [RWC 2000]
World Wide Web Enhancement (TCPIP Required) [WebManager 3000] IsTcpip
CL 0 1 NETFBASE.EXE
CCL 0 1 NETDOM.INI
CCL 0 1 NETNODES.INI
CCL 0 1 INSTALL.BAT
CCL 0 1 NETFINST.EXE
CCL 0 1 INSTALL.INI
CCL 0 1 WININST.HLP
CL 0 1 APCKINST.DLL
Option Name
Dll-entrypoint
option file
option file
...
install command
install command
...
An identifying comment by the installation program. All options must
have a different Option Name. This is used only for identification.
Used to determine whether an option is valid for a given target machine.
In most cases, it should be the reserved string "NULL."