Table of Contents
Advertisement
FRU information (service only)
Diskette/CD-ROM drives
© Copyright IBM Corp. 2001
Field Replacement Units (FRUs) should be replaced by qualified service personnel
only.
Note: Read"Safety information" on page 149 and "Before you begin" on page 46.
To remove the diskette/CD-ROM drive:
1.
Power off the server/workstation.
2.
Remove the cover. See "Removing the cover" on page 49.
3.
Disconnect the cables for the floppy disk drive and the CD-ROM drive from the
system board.
4.
Remove the fans. See "Fan assembly replacement" on page 91.
5.
Remove the screws.
6.
Gently pull the CD-ROM/diskette drive subassembly up and back
simultaneously to remove it from the system.
115
Advertisement
Table of Contents
