Removing the DASD backplane assembly
To remove the DASD backplane assembly:
1. Power off the server.
2. Disconnect all external cables from the server.
3. Remove the cover. See "Removing the cover, door, and bezel" on page 48.
4. Disconnect cable.
5. Press the arrow on the tab 1 to release the backplane.
6. Carefully slide out the DASD backplane 2 to remove.
Removing the power supply backplane
122
Hardware Maintenance Manual: xSeries 230 Models 6RY, 61Y
1
Tab
2
DASD backplane