Multi-Address Transmission - Toshiba E-STUDIO45 Operator's Manual

Multi-address Transmission

The "multi-address transmission" function allows you to send the same original to two or more remote
FAXes in a single operation, which can be done by combining direct entry (digital keys), phone book and
group. This eliminates the trouble of placing the original in the copier and then dialing the number for
each destination.
The following shows the number of destinations that can be entered according to how the remote FAX is
specified:
• By digital keys (direct entry) only: 100 destinations
• By phone book only: 400 destinations
• By group only: 50 destinations
• By combining digital keys (direct entry), phone book and group: 1000 destinations
*You can set multi-address transmission only by the memory TX mode. Memory TX
1
Place the original.
2 Set the transmission conditions.
3 Specify the remote FAXes.
• To continuously enter remote FAX numbers after having
specified them by means of the digital keys, press the
MULTI key, then enter the next one.
• To continuously enter remote FAX numbers after having
specified them by means of the phone book or group, you
do not need to press the MULTI key.
Tip
• To cancel the remote FAX number which is being entered by
the digital keys, press the
• To cancel a remote FAX specified by the phone book or group,
press the highlighted key for the remote FAX again.
• To cancel all specified remote FAXes, press the CANCEL
key.
4
Specify all remote FAXes and then press the
START key.
Page 2-6
Page 2-10
CLEAR/STOP key once.
1
2
3
2-18
4
5
6
7
8
9
10
11
12
2-15