Caller Id - NEC XN120 User Manual

Caller ID

You will need to enable this setting if:
·
You have Caller ID service supplied on your outside lines.
·
You have normal telephones that are Caller ID compatible.
The XN120 can detect the Caller ID and display it on the LCD display of the XN120 system phones.
It can also be available at a normal phone that is Caller ID compatible.
System Operation:
You will need turn on the Caller ID detection for each trunk that it will be received on.
You will also need to turn on Caller ID for each of the normal telephones that are Caller ID compatible.
Program 14-02-10
Turn on Caller ID for each
trunk.
Program 15-03-09
Turn on Caller ID for each
normal telephone that is Caller
ID compatible.
You do not need to change
this option for the XN120
system phones.
See Also:
There are no other related settings.
XN120 Expansion Unit Guide
Default Setting:
14-02-10 is set to 0 (Caller ID is turned off) for each trunk.
14-02-10 Trunk 1
Caller ID
Ø For each trunk enter 1 to turn on Caller ID, you can overwrite
the current entry.
Ø Press HOLD to confirm the entry and step to the next option.
Ø Press DC several times when you are done to return to the
Program Mode.
Ø (Press SPK to save changes and exit if you are finished).
Default Setting:
15-03-09 is set to 0 (Caller ID is turned off) for each telephone.
15-03-09 Tel 200
Ext No Display 0
Ø For each telephone enter 1 to turn on Caller ID, you can
overwrite the current entry.
Ø Press HOLD to confirm the entry and step to the next option.
Ø Press DC several times when you are done to return to the
Program Mode.
Ø (Press SPK to save changes and exit if you are finished).
Configure the Expansion Unit
0
Press Vol p q
to select the
trunk number
Press Vol p q
to select the
telephone
number
33