Flash - NEC DS1000 Product Description

Feature Quick Steps
To send a call to a Terminal or Circular Hunting group:
To send a call to a UCD Hunting group:
To temporarily install or remove your extension from your UCD group:
1.
2.

Flash

Feature Quick Steps
1.
DS1000/2000 Product Description
The options available depend on the type of hunting set up.
Transfer a trunk call to a hunt group member.
Set up a DIL to a hunt group member.
Place a ringing Intercom call to a hunt group member.
Set up a hunt group member as a trunk's overflow destination.
Transfer a call to the UCD master number.
Set up a DIL to the UCD master number.
Place an Intercom call to the UCD master number.
Press ICM and dial *5.
Dial 4 to return your extension to your UCD group, or
Dial 6 to remove your extension from your UCD group.
Extension users can access
certain CO and PBX
features by interrupting
trunk loop current.
Press FLASH (if applicable)
Section 3: Features
Availability: All versions.
Flash allows an extension user to access certain CO and PBX
features by interrupting trunk loop current. Flash lets an exten-
sion user take full advantage of whatever features the connected
telco or PBX offers. You must set the Flash parameters for com-
patibility with the connected telco or PBX.
+
Dial the code for the desired CO/PBX feature.
Section 3: Features
3
49