Ds1000 Default Hardware Configuration; Default Feature Configuration; Ds2000 Fixed Slot Software; Ds2000 Universal Slot Software And Ds1000 - NEC DS1000 Product Description

Section 2: Components
DS1000 Default Hardware Configuration
Default Feature Configuration

DS2000 Fixed Slot Software

DS2000 Universal Slot Software and DS1000

24 Section 2: Components
Using the factory installed default configuration, your DS1000 system provides:
Trunks
Digital Extensions
Analog Extensions
Analog Door Boxes
Relays
Page Output
Music Input
All trunks are loop start DTMF
All extensions are 22-Button Display models.
Trunks 1-8 ring on line keys 1-8.
Extension users cannot press ICM and dial 9 for an outside line. Trunk Group Routing, Line
Dial-Up, and Direct Trunk Access are disabled.
The last active Programmable Function Key on extension 300 is the Operator Call Key.
All trunks are loop start DTMF.
All extensions are 22-Button Display models.
DS1000: Trunks 1-6 ring on line keys 1-6. (Trunks 4-6 will only work if you have an Expansion
Board Installed.)
DS2000: Trunks 1-24 ring on line keys 1-24.
Extension users can press ICM and dial 9 for an outside line. Line Dial-Up and Direct Trunk
Access are disabled.
At the attendant's extension (300), key 11 is the Night Key and key 12 is the Operator Call Key.
- The attendant presses the Night Key to put the system in the night mode.
- The attendant presses the Operator Call Key to answer incoming queued Intercom calls.
Base Expansion
3 3
8 8
4 4
1 1
1 1
1
1
DS1000/2000 Product Description
Total
6
16
8
2
2
1
1