System Timers - NEC DS1000 Product Description

System Timers

DS1000/2000 Product Description
Use the system-wide timers
to tailor the system to the
site's requirements.
Option
Park Orbit
Transfer Recall
Intercom Inter-digit
Meet-Me Conference
Dialing Pause
Page Duration
Door Unlock
DIL No Answer
Trunk Revert
Trunk Delay Ring
Section 3: Features
Availability: All versions.
The system-wide timers allow the administrator to tailor system
performance to meet the specific application requirements.
Review the table below for a description of each timer.
Table 5: System Timers
Description
Use this timer to set how long a call stays in System Park Orbit
before it recalls the extension that parked it. This timer is for
orbits 60-67 only. The recall for orbits 68 and 69 is fixed at 5
minutes.
Use this timer to set how long a transferred call rings the destina-
tion extension before recalling the extension from which it was
initially transferred. This option pertains to all idle extensions, as
well as busy multibutton extensions. Note that this timer does
not control how long a transferred call rings a busy operator.
When an extension user places a call, they must dial each suc-
ceeding digit within this interval.
When a user initiates a Meet-Me Conference, the system waits
this interval for the Paged parties to join the call.
For Automatic Route Selection, the system waits this interval
when it encounters a pause in an ARS Dial Treatment.
For Speed Dial, the system waits this interval when it encounters
a pause in a Speed Dial bin.
Use this timer to set the maximum length of Page announce-
ments.
When a single line (2500 type) user hookflashes while talking to
a Door Box, the Door Box strike opens for this interval.
This timer sets how long a DIL rings an idle extension before
Key Ring occurs. Key Ring rings all extensions programmed to
ring for that line.
This timer sets how long Hold Recall rings the extension that
placed the call on hold before Key Ring occurs. Key Ring rings
all extensions programmed to ring for that line.
This timer also sets how long a Transfer Recall rings the exten-
sion that initially transferred the call before Key Ring occurs.
Use this timer to set how long the system waits before ringing an
extension that has the Delayed Ringing option enabled.
Section 3: Features
3
85