Volume Controls; Year 2000 Compliance - NEC DS1000 Product Description

Section 3: Features

Volume Controls

Year 2000 Compliance

100 Section 3: Features
Easily adjust the volume of
ringing, Paging and other
features.
Incoming Intercom and trunk ringing
Background Music, Paging, Handsfree speaker, and incoming Intercom voice announcements
broadcast through the telephone speaker
Handset/headset receiver volume and incoming Voice Over Announcements
1,2
Off Hook Ringing
Incoming Voice Over Announcement
1
These features retain the user-set volume levels.
2
Additionally, these features retain the user-set volume levels after a system reset or power-down.
There are six steps in the Volume Control adjustment range. This makes it easier for the keyset user
to set up just the right volume levels.
Feature Quick Steps
To adjust the volume of a feature while it is active:
While your keyset is idle, pressing VOL
trast. Turn to Alphanumeric Display on page 25 for more.
1. Press VOL and VOL .
The system is fully Y2K
(Year 2000) compliant.
will process the leap year correctly and will not require an upgrade or reprogramming. In addition,
the SMDR report will properly show the years in the 21st century.
Availability: All versions
A keyset user can press VOL
of the following features while they are active. Note that the cat-
egories grouped together are the same control. For example,
adjusting Intercom ringing also adjusts trunk ringing.
1,2
1
and VOL
Availability: All versions.
The system provides Year 2000 Compliance. The change of the
date from one century to the next is handled by the system soft-
ware and is no different than the change from one year to the
next. The day following 12/31/99 will be 01/01/00. The system
DS1000/2000 Product Description
and VOL to adjust the volume
1
adjusts the keyset display con-