Set Mode - Icom IC-M25 Instruction Manual

Floats and Flashes Alarm function
❏
Alarm periodically sounds while the transceiver is floating in
the water, to allow you to find the transceiver in the water.
• OFF: The function is OFF.
• ON: Alarm periodically sounds while the transceiver is
floating in the water. This function stops when a
key is pushed or 10 seconds have past after the
transceiver is retrieved from the water.
CAUTION: The alarm sounds loudly.
Push
Alarm OFF (default)
"FLAr" Automatic AquaQuake function
❏
This function automatically activates the AquaQuake Water
Draining function when the transceiver is retrieved from the
water.
• OFF:
• 2/5/10: The AquaQuake Water Draining function is
Alarm ON
OFF (default)
NOTE: This function does not activate when an external
speaker microphone is connected.
The function is OFF.
automatically activated after stopping the floating
alarm sound. A low vibration tone sounds for the
specified time of 2, 5 or 10 seconds, to remove
water from the speaker grill.
Push
7

SET MODE

"AquA" 1
2
3
4
5
6
7
8
9
10
11
2
12
13
14
15
16
21