Scan Operation (All Except The Hol Version); Setting Favorite Channels; Starting A Scan - Icom IC-M25 Instruction Manual

Setting Favorite channels

You can quickly recall often-used channels by setting them
as Favorite channels, which can be independently assigned
to each channel group.
[U/I/C] (CH/WX) for 1 second to change the
Hold down
q
channel group, if needed. Repeat to go to the next group.
Select the desired channel to be set as a Favorite channel.
w
Hold down [*] for 1 second.
e
• The displayed channel is set as a Favorite channel.
• " " appears on the display.
Selecting a Favorite channel:
➥ Push [FAV] several times to select the desired Favorite
channel.
• Non-Favorite channels are skipped and not displayed.
• You can also select the favorite channels by pushing [Y] or [Z]
while holding down [FAV].
Clearing a Favorite channel:
Select the desired Favorite channel you want to clear.
q
[*] for 1 second.
Hold down
w
• " " disappears.
Clearing all Favorite channels:
➥ While holding down [*] (FAV), turn ON the power.
• All Favorite channels in the selected channel group are cleared.
• When no channel is set as Favorite channel:
Holding down [*] (FAV), turn ON the power sets all channels as
Favorite channels.

SCAN OPERATION (All except the HOL version)

Starting a scan

[U/I/C] (CH/WX) for 1 second to change the
Hold down
q
channel group. Repeat to advance to the desired group.
• When the Weather Alert function is in use, select a desired
weather channel by pushing [CH/WX] and [Y] or [Z].
[SCAN] to start a scan.
Push
w
• "SCAN" blinks while scanning.
• During a priority scan, "16" appears on the sub channel readout .
• When a signal is received, the scan pauses until the signal
disappears, or resumes after pausing 5 seconds, depending on
the Scan Resume Timer setting.
To stop the scan, push
e
• "SCAN" disappears.
• Pushing [PTT], [16/C], [CH/WX] or [FAV] also stops the scan.
Push
Appears
Blinks
When a signal is received
NOTE:
In order to properly receive signals, the squelch must be
adjusted to the proper level. (Page 11)
[SCAN] again.
[Example]: Starting a normal scan.
Scanning starts
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Blinks
15
16
15