Dualwatch And Tri-Watch; Description; Operation - Icom IC-M25 Instruction Manual

6

DUALWATCH AND TRI-WATCH

Description

Dualwatch and Tri-watch are convenient to monitor Channel
16 while you are operating on another channel.
Ch 16 Ch 88
Monitors Channel 16
while receiving on
another channel.
Dualwatch
When a signal is received:
• On Channel 16
Dualwatch/Tri-watch pauses on Channel 16 until the
signal disappears.
• On the Call channel
Tri-watch switches to Dualwatch until the signal on the
Call channel disappears.
16
Normal
channel
Ch 88
Normal
channel
Call
Ch 9
channel
Monitors Channel 16 and
the Call channel while
receiving on another channel.
Tri-watch

Operation

Select Dualwatch or Tri-watch in the Set mode. (Page 19)
q
Select the desired channel.
w
e Hold down [DUAL] (SCAN) for 1 second to start
Dualwatch or Tri-watch.
• "DUAL" blinks during Dualwatch. "TRI" blinks during Tri-watch.
• A beep tone sounds when a signal is received on Channel 16.
r To cancel Dualwatch or Tri-watch, push [DUAL] (SCAN)
again.
[Example]: Operating Tri-watch on INT channel 07.
Ch 16
Tri-watch starts.
Tri-watch resumes after
the signal disappears.
A signal is received on the
Call channel.
The signal received on
Channel 16 takes priority.