Auto Scan Function - Icom IC-M25 Instruction Manual

Auto Scan function

❏
(Not available in the HOL version)
The Auto Scan function automatically starts a normal or
priority scan when no signal is received, and no operation is
performed for 30 seconds.
Auto scan OFF (default)
Dual/Tri-watch function
❏
(Not available in the HOL version)
Set the watch type to Dualwatch or Tri-watch.
• d- : Dualwatch.
• t- : Tri-watch.
Push
Dualwatch function
(default)
"Auto"
Push
Auto scan ON
"dt"
Tri-watch function
Monitor key action
❏
The monitor key momentary activates the Monitor function.
Select a key action option.
• Pu (PUSH): The Monitor function is activated while
holding down [MONI] (VOL/SQL) for more
than 1 second. The squelch function is
canceled while holding down the key.
• Ho (HOLD): The Monitor function is activated by holding
down [MONI] (VOL/SQL) for more than 1
second.
The squelch function is canceled until
[MONI] (VOL/SQL) is pushed again.
Push setting (default)
SET MODE
"SqLS"
Push
Hold setting
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
19