Print Settings
Print Settings allow you to set the parameters of your print and build them into your print file . There are three (3)
different options for setting the print parameters .
Custom:
Allows you to set the layer thickness, density, and fill pattern . You may also enable or disable supports
and rafts .
Standard: A strong print that does not require fine details .
Draft:
A print that does not require strength or fine details .
Layers
•
0 .200 mm
Density
•
Hollow
•
Strong
•
Almost Solid
Fill Pattern
•
Honeycomb
•
Diamonds
•
Lines
Supports
•
Supports are structures that are automatically printed under overhanging parts of your model .
Raft
•
Rafts are printed during the first few layers to help the model adhere to the print pad .
3D Systems, Inc.
Standard print time
Short print times and low material use
Stronger prints
High material use and almost solid prints
Used for strong prints
For general printing
Shorter print time
48