Table of Contents
Advertisement
18 . Mount the cartridge on the right side of the printer and select the
checkmark
to continue .
NOTE: It may become necessary to slightly rotate the cartridge
to seat it properly .
NOTE: The print jet will begin to heat . Once the print jet has
reached the proper temperature, the printer will prime material
into the refuse bin .
19 . The right cartridge has been installed . Select the
continue .
20 . Select PRINT .
21 . It is recommended that Auto Level is performed prior to the first print .
Ensure the print pad is clean and installed properly and then select the
checkmark
to continue to Auto Level .
NOTE: When installed properly, the print pad magnetically
attaches to the adjustment knobs .
3D Systems, Inc.
checkmark
to
18
Hide quick links:
Advertisement
Table of Contents
