Initial Setup Of The Printer - EKOCYCLE Cube User Manual

INITIAL SETUP OF THE PRINTER

1 . Select your language . Select the
NOTE: The selected language will be indicated .
2 . Enter a name for your printer . Scroll through the characters by pressing
the arrow symbols on each side of the screen . Select the characters to
spell the name . Select the
NOTE: You can change the name of your printer at any time .
Navigate to the System 1 screen, select CUBE NAME and follow
the instructions on the touchscreen display .
NOTE: Selecting the
letters, uppercase letters and numerals .
NOTE: The printer will search for wireless networks .
3 . Connect the printer to your network . Use the up or down arrows to
scroll to your network choice . Select the network name . Select
bypass this step .
NOTE: You can connect to a wireless network at any time .
Navigate to the Network screen, select WIFI and follow the
prompts on the touchscreen display .
NOTE: The printer can also connect to an ad hoc network, a
decentralized network that wirelessly connects a local computer
to the printer directly . The computer must have a wireless
adapter configured for ad hoc mode . The adapter must use the
same SSID as is found in the printer . Connecting to an ad hoc
network is discussed further in the section titled
Ad Hoc Network .
3D Systems, Inc.
checkmark to continue .
checkmark to confirm your choice .
abc button toggles between lowercase
SKIP to
Setting Up an
12