Table of Contents
Advertisement
NOTE: The print jet will begin to heat . Once the print jet has
reached the proper temperature, the printer will prime material
into the refuse bin .
15 . The left cartridge has been installed . Select the
NOTE: The printer will begin to heat . Wait until the printer
has finished heating and then follow the user prompts in the
touchscreen menu .
16 . Insert the print jet (from the cartridge that will be mounted on the right
side of the printer) into the right print jet opening on top of the printer .
17 . Rotate the print jet clockwise until the dots (A) align . Select the
checkmark
to continue .
NOTE: As you rotate the print jet, ensure the print jet tube is
tucked under the top of the printer cover .
3D Systems, Inc.
checkmark
to continue .
17
A
Hide quick links:
Advertisement
Table of Contents
