UNPACKING AND SETTING UP YOUR PRINTER
Casing and Contents:
Depending on the configuration, up to two cartridges may be included . Not every printer will be packaged with two
NOTE: The sandpaper should only be used for lightly sanding the print pad when prompted by the
touchscreen display . It should not be used for sanding parts . For more information, refer to the section
titled Print Pad Maintenance .
NOTE: The actual appearance of the contents may differ from the illustrations .
UNPACKING AND INSTALLING YOUR PRINTER
NOTE: Keep all packing materials for future transport . Shipping the printer without using the original
packing materials may damage the printer and void the manufacturer's warranty .
Pull the clips (A) and remove them from the top of the printer box .
3D Systems, Inc.
Removable Print Pad
USB Mass Storage
Quick Start Guide
1 .5 mm Allen